Loading...
Photo paper
- photo papers and films for technical use
Aerial photo B-4 For photo prints from aeronegative
Film for recorders and recorders
- tape metallized LM-35P
Perforated metallized tape LM-35P with a width of 35 mm, is used to register information of various types of recorders. It can be used as a marker for metal-pickup sensors, as a raccord ribbon for various kinds of developing machines.
- black tape LCH-35S
Tape black LCh-S "Svema". 35 mm, perf., Tats.
- a film for K3-63 recorders
Film for recorders. It is intended for recording by corundum cutter information on the altitude, speed and overload of an aircraft during flight. The film is made on a triacetate basis.
Magnetic tapes
The use of magnetic tapes:
- Magnetic tapes are used in on-board means of recording parameters intended for automatic recording of flight parameters (altitude, flight speed, aircraft engine speed, angle of attack, acceleration) and the parameters of the most important units and systems.
- Magnetic tape is used in ground-based systems for recording telemetric information of flying objects and its subsequent processing, for recording code information in storage devices of information systems.
Magnetic tapes I 4335, I 4435, I 4535 for recording and reproducing multitrack impulse signals with a density of up to 1300 p / mm as part of precision magnetic recording equipment. Climatic conditions (from -60 ° C to + 60 ° C), mechanical conditions (shock loads: shock frequency not more than 80 min-1 and acceleration not more than 117.6 m \ s2, vibration loads in the range of frequencies not more than 300 Hz). They are made on the basis of gamma iron oxide. It complies with the requirements of TU 6-17-1308-85, GOST 22507-77. (width 6.3mm; 12.7mm; 19.05mm; 25.4mm).
Magnetic tapes В 4618, В 4617, В 4407 are intended for multitrack digital and analog recording of code information in storage devices of information systems of electronic computers. It complies with the requirements of TU 6-17-1322-85 (12.7 mm, width 25.4 mm, width 35 mm).
Magnetic tape with a black silver layer LCH-S. It is used for use in computer technology. The base is triacetate cellulose, perforated, width 35mm, length 300m. The optical density is not less than 2.9 B. It complies with the requirements of TU 6-17-740-75.
Photochemistry
- Developing solutions for chemical photographic processing of black and white aerial films:
Developer UP-2, UP-2M (TU6-41-1025-91) for black and white aerial films, developer UP-4, UP-4M, ASP-3M, ASP-20, N-2, N-3, N- 3M, FGM-1, FGM-2 for forced chemical-photographic processing of photographic materials, UP-5 (TU 6-0576-1264.041-91) for black and white aerial films, UPB-1 (TU6-17-1259-84) for high-speed chemical-photographic processing of black and white aerial films, developer UPB-2, UPP-1 for chemical-photographic processing of color and spectrozonal photographic materials.
COSP for high-speed chemical-photographic processing of spectrozonal aerial photographs in rewinding devices AMPP-1, UPPP-2.
- Fixing solutions for chemical photographic processing of black and white aerial films:
Fixer BKF-2 TU 6-41-1025-91, BKF-7, BFR-1 TU 9605761264.036-96.